Galvanized Hardware
Galvanized Hardware for Cellular Tower Builders
Galvanized Hardware for cellular tower builders provide a fast and convenient source of problem solving at your cellular tower site. Cellular tower builders find our galvanized hardware which includes but not limited to Shackles, Hex Bolts, Heavy Hex Nuts, Lock Washers, Flat Washers, Square Washers, Backing Plates and Fence Post Caps handy to have. Cellular tower sites become more manageable when bulk galvanized hardware is available on site.
Galvanized Hardware Hex Bolts are sold in sizes 3/8 inch to 3/4 inches in diameter and lengths of 1 inch to 5 inches. Galvanized Hex Bolts come in standard thread length or fully threaded. Cellular tower builders can choose between Grade 5 or A325 types. Galvanized Hex Bolts can be purchased separately or in quantities ranging from 50 to 450. Bucket quantities are convenient for cellular tower sites.
Galvanized Hardware Hex Nuts are also sold in sizes 3/8 inch to 3/4 inches. Two types of galvanized hex nuts are available, 2H Heavy and DH (A325). Galvanized Hex Nuts can be purchased separately or in quantities of 100 – 200 - 500 determined by hex nut size. All quantities are dependent on hex nut size chosen by the cellular tower builder.
Galvanized Hardware Lock Washers as well as our galvanized flat washers range in size from 3/8 inch to 3/4 inch. Galvanized lock washers are sold individually or quantities of 400 to 2500. Galvanized flat washers can also be purchased separately or quantities of 250 to 1500. Bucket quantities depend on size of washer ordered by cellular tower builder.
Galvanized Hardware Square Washers are sized at 1/4 inch x 1/4 inch x 2 inches and constructed from galvanized steel. Square Washers contain hole sizes of 3/8 or 1/2 inch and are sold in buckets of 150.
Galvanized Hardware Shackles are made from galvanized steel and come in sizes if 1/4 inch, 5/16 inch and 3/8 inch. Galvanized shackles are a great way for cellular tower builders to connect and hoist, pull or carry bulk steel, hardware, etc. at cellular tower sites.
Galvanized Hardware Backing Plates come in two sizes, 1/4 inch x 4 inch x 4 inch and 1/4 inch x 6 inch x 6 inches. Bolt holes are 3/4 inch and these backing plates are sold individually.
Galvanized Hardware Fence Post Caps come in OD sizes of 2-3/8 inch, 2-7/8 inch and 3-1/2 inch. Fence Post Caps are sold individually.
Cellular tower builders will find our shackles, hex bolts, hex nuts, lock washers, flat washers, square washers, backing plates and other galvanized hardware and stainless steel hardware to be an economical and streamlined way to supply your cellular tower site.
Compare Galvanized Hardware for Cellular Tower Builders
Site Pro 1 - Full Line of Cellular Tower Builders Wireless Parts & Equipment
