Cable Ladders Back to Cable Ladders

Cable Ladders (4 Run 20')

• WCL4
• # of Runs: 4
• Ln.: 20’
• Width: 14”
• Each 20’ section includes six waveguide brackets that are pre-punched
  for Snap-In Hangers and Butterfly Hangers
• Hole pattern allows 40” (6 brackets per section) or 60” (4 brackets per section) spacing
• 1-3/4” x 1-3/4” x 1/8” side rails
• Each kit includes splices to attach additional sections
• All parts are hot-dip galvanized
• Purchase attachment kits separately (minimum of two kits required per 20’ ladder section)

Download Specs/Instructions

Cable Ladders (6 Run 20')

• WCL6 • Length - 20' • Width - 20-5/8"
• Runs - 6 • 1-3/4'' x 1-3/4'' x 1/8'' side rails.
• Each 20' section includes 6 waveguide brackets that are
  pre-punched for Snap-In hangers and butterfly hangers.
• Hole pattern allows 40" (6 brackets per section)
  or 60" (4 brackets per section) spacing.
• Each kit includes splices to attach additional sections.
• All parts are Hot-Dip Galvanized.
• Purchase attachments kits separately (See Part # CLK-U).


Download Specs/Instructions

Cable Ladders (9 Run 20')

• WCL9 • Length - 20' • Width - 29-5/8"
• Runs - 9 • 1-3/4'' x 1-3/4'' x 1/8'' side rails.
• Each 20' section includes 6 waveguide brackets that are
  pre-punched for Snap-In hangers and butterfly hangers.
• Hole pattern allows 40" (6 brackets per section)
  or 60" (4 brackets per section) spacing.
• Each kit includes splices to attach additional sections.
• All parts are Hot-Dip Galvanized.
• Purchase attachments kits separately (See Part # CLK-U).


Download Specs/Instructions

Cable Ladders (12 Run 20')

• WCL12 • Length - 20' • Width - 38-5/8"
• Runs - 12 • 1-3/4'' x 1-3/4'' x 1/8'' side rails.
• Each 20' section includes 6 waveguide brackets that are
  pre-punched for Snap-In hangers and butterfly hangers.
• Hole pattern allows 40" (6 brackets per section)
  or 60" (4 brackets per section) spacing.
• Each kit includes splices to attach additional sections.
• All parts are Hot-Dip Galvanized.
• Purchase attachments kits separately (See Part # CLK-U).


Download Specs/Instructions

Universal Ladder Attachment Kits (angles 2 to 5'' pipes 1 to 4.5'')

• CLK-U • Used to attach ladders to towers.
• Universal Kit (angles 2"-5" & pipes 1"- 4-1/2")
• Use a minimum of two kits per 20' section of ladder.
• All parts are Hot-Dip Galvanized.


Download Specs/Instructions