Rooftop Mounts
Universal Tri-Sector Mount Kit
- Allow attachment of three panel antennas to a single pipe mast
- Kits includes two brackets with hardware for attaching 2-3/8”, 2-7/8”, and 3-1/2” OD Antenna Mounting Pipes
| Photo | Part# | Desc. | Weight | Pricing | Cart |
|---|---|---|---|---|---|
 |
Universal Tri-Sector Mount Kit, 2-7/8” to 6-5/8” OD | 36 lb | $112.99 | ||
 |
UTSM-L |
Universal Tri-Sector Mount Kit, 6” to 10” OD | 51 lb | $138.99 |
Non-Penetrating Rooftop Angle Frames
Roof Top Mounts - Non-Penetrating Angle Frames
• Available with or without Antenna Mounting Pipes
• Welded trays for easy assembly
• Standard kit accepts 2-3/8'' Antenna Mounting Pipes
• For other size Antenna Mounting Pipes purchase
UPA-K Universal Pipe Mount Kit
• Purchase Rubber Mats separately on this page (4 required)
• Footprint is 93'' width x 98'' depth
• Call or see our online assembly drawings for ballast equations
• Available with or without Antenna Mounting Pipes
• Welded trays for easy assembly
• Standard kit accepts 2-3/8'' Antenna Mounting Pipes
• For other size Antenna Mounting Pipes purchase
UPA-K Universal Pipe Mount Kit
• Purchase Rubber Mats separately on this page (4 required)
• Footprint is 93'' width x 98'' depth
• Call or see our online assembly drawings for ballast equations
| Photo | Part# | Face Width | # of Mounting Pipes | Length of Mounting Pipes | Pricing | Cart |
|---|---|---|---|---|---|---|
 |
RTW-7 |
7' | No Pipes | N/A | $740.00 | |
 |
RTW-7-2-96 |
7' | 2 | 96'' | $835.00 | |
 |
RTW-7-2-126 |
7' | 2 | 126'' | $865.00 | |
 |
RTW-10 |
10'-6'' | No Pipes | N/A | $745.00 | |
 |
RTW-10-3-96 |
10'-6'' | 3 | 96'' | $885.00 | |
 |
RTW-10-3-126 |
10'-6'' | 3 | 126'' | $930.00 | |
 |
RTW-12 |
12'-6'' | No Pipes | N/A | $805.00 | |
 |
RTW-12-3-96 |
12'-6'' | 3 | 96'' | $945.00 | |
 |
RTW-12-3-126 |
12'-6'' | 3 | 126'' | $990.00 | |
 |
RTW-12-4-96 |
12'-6'' | 4 | 96'' | $995.00 | |
 |
RTW-12-4-126 |
12'-6'' | 4 | 126'' | $1,050.00 | |
 |
RTW-14 |
14'-6'' | No Pipes | N/A | $1,460.00 | |
 |
RTW-14-4-96 |
14'-6'' | 4 | 96'' | $1,645.00 | |
 |
RTW-14-4-126 |
14'-6'' | 4 | 126'' | $1,705.00 | |
 |
BHD10-K |
-- | Ballast Tie Down Kit | 2 Required |
$35.75 | |
 |
UPA-K |
-- | Universal Pipe Mount Kit Adapter (1-1/4'' - 4'') Pipes |
Use one kit per frame, not necessary for 2-3/8'' pipes. | $74.99 |
Rubber Mats
Roof-Top Mounts
Rubber Mats
• Each non-penetrating frame requires 4 mats
• Manufactured from UV resistant rubber
• 1/2'' thick
Rubber Mats
• Each non-penetrating frame requires 4 mats
• Manufactured from UV resistant rubber
• 1/2'' thick
| Photo | Part# | Size | U of M | Pricing | Cart |
|---|---|---|---|---|---|
 |
MAT18 |
1/2'' x 18'' x 48'' | Each | $20.75 |
XLD Non-Penetrating Rooftop Pipe Frames
Roof Top Mounts - XLD Non-Penetrating Frames
• XLD Xtreme Load Design Rooftop Frames
• Perfect for larger loads like multiple RRU’s or antennas
• Available with or without Antenna Mounting Pipes
• Welded trays for easy assembly
• Standard kit accepts 2-3/8'' Antenna Mounting Pipes
(available in Hardware section)
• For other size Antenna Mounting Pipes purchase
SCX7-U Universal Crossover Plate Kits
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
• XLD Xtreme Load Design Rooftop Frames
• Perfect for larger loads like multiple RRU’s or antennas
• Available with or without Antenna Mounting Pipes
• Welded trays for easy assembly
• Standard kit accepts 2-3/8'' Antenna Mounting Pipes
(available in Hardware section)
• For other size Antenna Mounting Pipes purchase
SCX7-U Universal Crossover Plate Kits
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
| Photo | Part# | Face Width | Mounting Pipes | Footprint | Mats Req | Pricing | Cart |
|---|---|---|---|---|---|---|---|
 |
RTP10 |
10'-6'' | No Pipes | 92'' x 126'' | 6 | $1,180.00 | |
 |
RTP10-496 |
10'-6'' | (4) 2-3/8'' x 96'' | 92'' x 126'' | 6 | $1,370.00 | |
 |
RTP10-4126 |
10'-6'' | (4) 2-3/8'' x 126'' | 92'' x 126'' | 6 | $1,415.00 | |
 |
RTP12 |
12'-6'' | No Pipes | 92'' x 150'' | 8 | $1,415.00 | |
 |
RTP12-496 |
12'-6'' | (4) 2-3/8'' x 96'' | 92'' x 150'' | 8 | $1,580.00 | |
 |
RTP12-4126 |
12'-6'' | (4) 2-3/8'' x 126'' | 92'' x 150'' | 8 | $1,630.00 | |
 |
RTP14 |
14'-6'' | No Pipes | 92'' x 174'' | 12 | $1,865.00 | |
 |
RTP14-496 |
14'-6'' | (4) 2-3/8'' x 96'' | 92'' x 174'' | 12 | $2,055.00 | |
 |
RTP14-4126 |
14'-6'' | (4) 2-3/8'' x 126'' | 92'' x 174'' | 12 | $2,105.00 | |
 |
MAT18 |
--- | --- | 1/2'' x 18'' x 48'' Rubber Mat | --- | $20.75 | |
 |
BHD10-K |
--- | Ballast Tie Down Kit | Required RTP10 (3) RTP12 (4) RTP14 (6) |
--- | $35.75 | |
 |
SCX7-U |
Universal Crossover Plate Kit | 1-1/2'' to 4-1/2'' Pipes | 2 Kits required per Mounting Pipe | --- | $50.49 |
XLD Non-Penetrating Rooftop Frames with RRU Mounts
Roof Top Mounts - XLD Non-Penetrating Frames RRU Mounts
• Similar to the XLD Non-Penetrating Rooftop Pipe Frames,
but include a rear RRU mounting frame
• Includes 2-3/8 x 174 antenna pipes
• Standard kit includes hardware for 2-3/8'' Antenna Mounting
Pipes
• If using other size Antenna Mounting Pipes purchase
SCX7-U Universal Crossover Plate Kits
• Welded trays for easy assembly
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
• Similar to the XLD Non-Penetrating Rooftop Pipe Frames,
but include a rear RRU mounting frame
• Includes 2-3/8 x 174 antenna pipes
• Standard kit includes hardware for 2-3/8'' Antenna Mounting
Pipes
• If using other size Antenna Mounting Pipes purchase
SCX7-U Universal Crossover Plate Kits
• Welded trays for easy assembly
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
| Photo | Part# | Face Width | Mounting Pipes | Footprint | Mats Req | Pricing | Cart |
|---|---|---|---|---|---|---|---|
 |
RTP10-3RRU |
10'-6'' | Included | 92'' x 126'' | 6 | $1,935.00 | |
 |
RTP12-3RRU |
12'-6'' | Included | 92'' x 150'' | 8 | $2,180.00 | |
 |
RTP14-3RRU |
14'-6'' | Included | 92'' x 174'' | 12 | $2,630.00 | |
 |
MAT18 |
--- | 1/2'' x 18'' x 48'' Rubber Mat | --- | --- | $20.75 | |
 |
BHD10-K |
--- | Ballast Tie Down Kit | Required RTP10-3RRU (3) RTP12-3RRU (4) RTP14-3RRU (6) |
--- | $35.75 | |
 |
SCX7-U |
Universal Crossover Plate Kit | 1-1/2'' to 4-1/2'' Pipes | 2 Kits required per Mounting Pipe | --- | $50.49 |
Non-Penetrating Rooftop RRU Mounts
Roof Top Mounts - Non-Penetrating RRU Mounts
• RT-RRU5HD is designed for 8 RRU mounting locations
• RT-RRU10HD is designed for 14 RRU mounting locations
• Horizontals are 12 ga x 10' galvanized slotted Unistrut for
direct mounting
• Suitable for mounting RRU’s on both sides
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
• RT-RRU5HD is designed for 8 RRU mounting locations
• RT-RRU10HD is designed for 14 RRU mounting locations
• Horizontals are 12 ga x 10' galvanized slotted Unistrut for
direct mounting
• Suitable for mounting RRU’s on both sides
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
| Photo | Part# | Face Width | Footprint | Mats Req | Pricing | Cart |
|---|---|---|---|---|---|---|
 |
RT-RRU5HD |
5' | 54.5'' x 63'' | 2 | $640.00 | |
 |
RT-RRU10HD |
10' | 84'' x 97.5'' | 4 | $910.00 | |
 |
MAT18 |
--- | 1/2'' x 18'' x 48'' Rubber Mat | $20.75 | ||
 |
BHD5-K |
--- | (RT-RRU5HD) Ballast Tie Down Kit 2 Required |
$30.75 | ||
 |
BHD10-K |
--- | (RT-RRU10HD) Ballast Tie Down Kit 2 Required |
$35.75 |
Rooftop Parapet Overhang Mounts
Roof Top Mounts
Parapet Overhang Mounts
• Non-penetrating design
• Small and large versions available
• Designed for parapet walls 24''-58'' height range
• Purchase 2-3/8'' Antenna Mounting Pipes separately
in hardware section
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
Parapet Overhang Mounts
• Non-penetrating design
• Small and large versions available
• Designed for parapet walls 24''-58'' height range
• Purchase 2-3/8'' Antenna Mounting Pipes separately
in hardware section
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
| Photo | Part# | Footprint | Mats Req | Pricing | Cart |
|---|---|---|---|---|---|
 |
RPO-S |
52'' x 63'' | 2 | $640.00 | |
 |
RPO-L |
84'' x 92'' | 4 | $790.00 | |
 |
MAT18 |
1/2'' x 18'' x 48'' Rubber Mat | --- | $20.75 | |
 |
BHD5-K |
(RPO-S) Ballast Tie Down Kit 2 Required |
--- | $30.75 | |
 |
BHD10-K |
(RPO-L) Ballast Tie Down Kit 2 Required |
--- | $35.75 |
Rooftop Flushmount Overhang Mounts
Roof Top Mounts - Flushmount Overhang Mounts
• Non-penetrating design
• Small and large versions available
• Purchase 2-3/8'' Antenna Mounting Pipes separately
in hardware section
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
• Non-penetrating design
• Small and large versions available
• Purchase 2-3/8'' Antenna Mounting Pipes separately
in hardware section
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
| Photo | Part# | Footprint | Mats Req | Pricing | Cart |
|---|---|---|---|---|---|
 |
RFO-S |
52'' x 63'' | 2 | $402.00 | |
 |
RFO-L |
84'' x 92'' | 4 | $585.00 | |
 |
MAT18 |
1/2'' x 18'' x 48'' Rubber Mat | --- | $20.75 | |
 |
BHD5-K |
(RFO-S) Ballast Tie Down Kit 2 Required |
--- | $30.75 | |
 |
BHD10-K |
(RFO-L) Ballast Tie Down Kit 2 Required |
--- | $35.75 |
XLD Rooftop Flushmount Overhang Mounts
Roof Top Mounts
XLD Flushmount Overhang Mounts
• Non-penetrating design
• Small and large versions available
• Purchase 2-3/8” Antenna Mounting Pipes separately
in hardware section
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
XLD Flushmount Overhang Mounts
• Non-penetrating design
• Small and large versions available
• Purchase 2-3/8” Antenna Mounting Pipes separately
in hardware section
• Purchase Rubber Mats separately
• Call or see our online assembly drawings for ballast equations
| Photo | Part# | Footprint | Mats Req | Pricing | Cart |
|---|---|---|---|---|---|
 |
RFO-SHD |
52'' x 63'' | 3 | $935.00 | |
 |
RFO-LHD |
84'' x 92'' | 6 | $1,180.00 | |
 |
MAT18 |
1/2'' x 18'' x 48'' Rubber Mat | --- | $20.75 | |
 |
BHD5-K |
(RFO-SHD) Ballast Tie Down Kit 2 Required |
--- | $30.75 | |
 |
BHD10-K |
(RFO-LHD) Ballast Tie Down Kit 2 Required |
--- | $35.75 |
Non-Penetrating Tripod
Roof-Top Mounts - Non-Penetrating Tripod
• Heavy-duty
• Welded trays for quick assembly
• Accepts 2-3/8'' - 4-1/2'' mast pipes
• Order pipe below or in Hardware section
• Purchase rubber mats separately
• Call or see our online assembly drawings for ballast equations
• Heavy-duty
• Welded trays for quick assembly
• Accepts 2-3/8'' - 4-1/2'' mast pipes
• Order pipe below or in Hardware section
• Purchase rubber mats separately
• Call or see our online assembly drawings for ballast equations
| Photo | Part# | Description | U of M | Pricing | Cart |
|---|---|---|---|---|---|
 |
TRPD-HD |
Non Penetrating Tripod | Each | $930.00 | |
 |
2-3/8'' x 72'' Mast Pipe | Each | $39.25 | ||
 |
2-3/8'' x 96'' Mast Pipe | Each | $49.75 | ||
 |
P2126 |
2-3/8'' x 126'' Mast Pipe | Each | $65.49 | |
 |
P3096 |
2-7/8'' x 96'' Mast Pipe | Each | $98.49 | |
 |
P30174 |
2-7/8'' x 174'' Mast Pipe | Each | $136.49 | |
 |
P3150 |
3-1/2'' x 150'' Mast Pipe | Each | $160.49 | |
 |
P3216 |
3-1/2'' x 216'' Mast Pipe | Each | $227.00 | |
 |
P4126 |
4-1/2'' x 126'' Mast Pipe | Each |
$200.00 |
|
 |
MAT18 |
1/2'' x 18'' x 48'' Rubber Mat (6 Required) | Each | $20.75 | |
 |
BHD10-K |
Ballast Tie-Down Kit (3 Required) | Each | $35.75 |
Penetrating Tripod
Roof-Top Mounts
Penetrating Tripod
• Heavy-duty
• Accepts 2-3/8'' - 4-1/2'' mast pipes
• Order pipe separately in Hardware section
• 1/2'' x 3'' Stainless wedge anchors included
Penetrating Tripod
• Heavy-duty
• Accepts 2-3/8'' - 4-1/2'' mast pipes
• Order pipe separately in Hardware section
• 1/2'' x 3'' Stainless wedge anchors included
| Photo | Part# | Description | Pricing | Cart |
|---|---|---|---|---|
 |
TRPD-HD-PEN |
Penetrating Tripod | $424.00 |
Penetrating Rooftop Mounts
- 2-3/8” OD by 10’-6” or 12’-6” face widths hold up to four panel antennas
- Unique angle iron base eliminates weep hole and pitch pockets
- Include attaching hardware to mount up to four 2-3/8” or 2-7/8” OD Antenna Mounting Pipes
- Antenna Mounting Pipes sold separately in Hardware section
| Photo | Part# | Desc. | Weight | Pricing | Cart |
|---|---|---|---|---|---|
 |
TP1-10 |
10' Single-Sector Penetrating Rooftop Mount | 478 lb | $930.00 | |
 |
TP1-12 |
12' Single-Sector Penetrating Rooftop Mount | 495 lb | $960.00 |
Water Tank Tripod Mount - Penetrating Roof Mount
Roof-Top Mounts
Penetrating Water Tank Tripod Mount
• Welds onto tanks
• Or bolt to rooftops with 1/2'' bolts
• 2-3/8'' x 96'' Mast
• Bracket slides for easy adjustment to sloped surfaces
Penetrating Water Tank Tripod Mount
• Welds onto tanks
• Or bolt to rooftops with 1/2'' bolts
• 2-3/8'' x 96'' Mast
• Bracket slides for easy adjustment to sloped surfaces
| Photo | Part# | Application | U of M | Pricing | Cart |
|---|---|---|---|---|---|
 |
WTT96 |
Water Tank Tripod | Each | $336.00 |
Quick Navigation
Need Assistance?
Our support team is availablefrom 8:30 AM - 8:00 PM ET
to assist you.