Products / Monopole Steel / Monopole Components
Monopole Components
Lightweight Ring Mounts
Monopole Components
Ring Mount - Lightweight
• Easy to use Lightweight Ring Mounts
• Perfect for applications using two antennas per sector
• 6'' x 6'' bolt pattern
• Large and Small Pole Adapter Kits also available
• Contact us for load and engineering data
Ring Mount - Lightweight
• Easy to use Lightweight Ring Mounts
• Perfect for applications using two antennas per sector
• 6'' x 6'' bolt pattern
• Large and Small Pole Adapter Kits also available
• Contact us for load and engineering data
| Photo | Part# | Type | Pole Sizes | Weight | Pricing | Cart |
|---|---|---|---|---|---|---|
 |
Lightweight Tri-Bracket | 10-1/2'' - 28'' | 89 lb | $364.00 | ||
 |
LP-42 |
Large-Pole Adapter Kit | 28'' - 42'' | 71 lb | $199.99 | |
 |
Small-Pole Adapter Kit | 6-5/8'' - 10-1/2'' | 33 Lb | $92.49 | ||
 |
UGLM4 |
Lightweight Quad Bracket | 10-1/2'' - 42'' | 111 lb | $484.00 | |
 |
Small-Pole Adapter Kit for UGLM4 | 6-5/8'' - 10-1/2'' | 46 lb | $122.99 |
Universal Ring Mounts
Monopole Components
Universal Ring Mount - Tri
• Included in many our kits, but also available separately
• Wider operating range than other brands
• Designed to stay as close as possible to monopole
• Thus not interfering with external climbing ladders
• Large pole adapter kit available (RM-ADK)
• RM-ADK for poles 45'' to 60''
• 6'' x 6'' Bolt pattern
• Contact us for load and engineering data
• See UQB4-E Universal Quad-Bracket below
Universal Ring Mount - Tri
• Included in many our kits, but also available separately
• Wider operating range than other brands
• Designed to stay as close as possible to monopole
• Thus not interfering with external climbing ladders
• Large pole adapter kit available (RM-ADK)
• RM-ADK for poles 45'' to 60''
• 6'' x 6'' Bolt pattern
• Contact us for load and engineering data
• See UQB4-E Universal Quad-Bracket below
| Photo | Part# | Type | Pole Sizes | Weight | Pricing | Cart |
|---|---|---|---|---|---|---|
 |
Universal Quad-Bracket | 12''- 60'' | 351 lbs | $999.00 | ||
 |
Universal Tri-Bracket | 12'' - 45'' | 269 lbs | $815.00 | ||
 |
RM-ADK |
Large-Pole Adapter Kit | 45'' - 60'' Adapter Kit | 101 lbs | $295.00 |
Super XLD Heavy-Duty Ring Mounts
Monopole Components
Ring Mounts HD Super XLD
• SUPER XLD - Our most robust Ring Mount Kits
• Designed for the most extreme loading conditions
• These are the Ring Mounts used in our new Fortress™
Platform mounts
• 18'' overall height provides 17'' contact area with the pole, reducing point loads and minimizing pole deformation
• Mounting hole pattern includes our standard 6'' x 6'' pattern
• There is also a 6'' x 11-1/2'' hole pattern for larger plates
• Kits include threaded rods and hardware
• Contact us for load and engineering datare
Ring Mounts HD Super XLD
• SUPER XLD - Our most robust Ring Mount Kits
• Designed for the most extreme loading conditions
• These are the Ring Mounts used in our new Fortress™
Platform mounts
• 18'' overall height provides 17'' contact area with the pole, reducing point loads and minimizing pole deformation
• Mounting hole pattern includes our standard 6'' x 6'' pattern
• There is also a 6'' x 11-1/2'' hole pattern for larger plates
• Kits include threaded rods and hardware
• Contact us for load and engineering datare
| Photo | Part# | Type | Pole Sizes | Weight | Pricing | Cart |
|---|---|---|---|---|---|---|
 |
RM3-HD |
Tri-Bracket Kit | 12'' - 45'' | 338 lb | $935.00 | |
| |
RM3-LPK |
RM3 Large Pole Adapter Kit | 45'' - 60'' | 100 lb | $318.00 | |
 |
RM4-HD |
Quad-Bracket Kit | 12'' - 60'' | 385 lb | $1,130.00 |
Flush Mount Adapter Kits
Monopole Components
Adapter Kit - Flush Mount
• Allows attachment of vertical Pipe to Ring Mounts
• Fit our standard or lightweight Ring Mounts
• FMA1 can be used to mount a Pipe horizontally or
vertically on our UGLM Lightweight Ring Mount
• Kits include plates and all hardware
• Order Antenna Mounting Pipes separately
• See Antenna Mounting Pipes in Hardware section
Adapter Kit - Flush Mount
• Allows attachment of vertical Pipe to Ring Mounts
• Fit our standard or lightweight Ring Mounts
• FMA1 can be used to mount a Pipe horizontally or
vertically on our UGLM Lightweight Ring Mount
• Kits include plates and all hardware
• Order Antenna Mounting Pipes separately
• See Antenna Mounting Pipes in Hardware section
| Photo | Part# | Description | Pipe Size Range | Weight | Pricing | Cart |
|---|---|---|---|---|---|---|
 |
1 Plate and Hardware | 1-1/2'' - 4-1/2'' | 14 lb | $48.75 | ||
 |
FMA1-2 |
2 Plates and Hardware | 1-1/2'' - 4-1/2'' | 30 lb | $100.49 | |
 |
4 Plates and Hardware | 1-1/2'' - 4-1/2'' | 57 lb | $173.49 |
Standoff Arms for Single Antenna
Monopole Components
Single Antenna Standoff Arms
• Versatile 8'', 2', or 3' Standoff Arms
• Accept 2-3/8'', 2-7/8'', or 3-1/2'' Pipes
• Accepts Pipes vertically or horizontally
• Fit our standard or lightweight Ring Mounts
• Includes attachment hardware
• Mounting plate is 1/2'' thick by 8-1/2'' square
• Mounting plate has four 11/16'' holes on 6'' centers
• Standoff is 4'' x 3/16'' square tube
Single Antenna Standoff Arms
• Versatile 8'', 2', or 3' Standoff Arms
• Accept 2-3/8'', 2-7/8'', or 3-1/2'' Pipes
• Accepts Pipes vertically or horizontally
• Fit our standard or lightweight Ring Mounts
• Includes attachment hardware
• Mounting plate is 1/2'' thick by 8-1/2'' square
• Mounting plate has four 11/16'' holes on 6'' centers
• Standoff is 4'' x 3/16'' square tube
| Photo | Part# | Description | Weight | Pricing | Cart |
|---|---|---|---|---|---|
 |
8'' Support Arm | 37 lb | $145.49 | ||
 |
24'' Support Arm | 51 lb | $176.49 | ||
 |
36'' Support Arm | 62 lb | $194.99 |
Support Arms
Monopole Components
Support Arms
• 18'', 24'', 36'' or 48'' length
• With 4-1/2'' OD x 18'' stub
• Includes attachment hardware
• Mounting plate is 3/4'' thick by 8'' square
• Mounting plate has four 11/16'' holes on 6'' centers
• Standoff is 4'' x 1/4'' square tube
• Unique welded gussets add strength
Support Arms
• 18'', 24'', 36'' or 48'' length
• With 4-1/2'' OD x 18'' stub
• Includes attachment hardware
• Mounting plate is 3/4'' thick by 8'' square
• Mounting plate has four 11/16'' holes on 6'' centers
• Standoff is 4'' x 1/4'' square tube
• Unique welded gussets add strength
| Photo | Part# | Description | Weight | Pricing | Cart |
|---|---|---|---|---|---|
 |
SV197-18 |
18'' Support Arm | 48 lb | $174.49 | |
 |
SV197-24 |
24'' Support Arm | 54 lb | $184.49 | |
 |
SV197-36 |
36'' Support Arm | 65 lb | $193.99 | |
 |
SV197-48 |
48'' Support Arm | 77 lb | $250.00 |
Dual Standoff Arms
Monopole Components
Standoff Arm - Dual
• Support two Antenna Mounting Pipes
• Stand off 28'' from Ring Mount
• Antenna Pipes have 36'' separation
• 0° - 30° down-tilt adjustment
• Mounting plate is 1/2'' thick by 8-1/2'' square
• Mounting plate has four 11/16'' holes on 6'' centers
• Standoff is 4'' x 3/16'' square tube
• Order Antenna Mounting Pipes separately
• See Antenna Mounting Pipes in Hardware section
Standoff Arm - Dual
• Support two Antenna Mounting Pipes
• Stand off 28'' from Ring Mount
• Antenna Pipes have 36'' separation
• 0° - 30° down-tilt adjustment
• Mounting plate is 1/2'' thick by 8-1/2'' square
• Mounting plate has four 11/16'' holes on 6'' centers
• Standoff is 4'' x 3/16'' square tube
• Order Antenna Mounting Pipes separately
• See Antenna Mounting Pipes in Hardware section
| Photo | Part# | Pipe Sizes | Stand off | Weight | Pricing | Cart |
|---|---|---|---|---|---|---|
 |
2-3/8'', 2-7/8'' or 3-1/2'' |
28'' | 86 lb | $432.00 | ||
 |
4'' or 4-1/2'' |
28'' | 93 lb | $446.00 |
Monopole Direct Frame Connection Kit
Monopole ComponentsConnection Kit - Monopole Direct Frame
• Use to attach V-Series Sector Frames to monopoles
• No mounting pipes required
• Kit includes two Ring Mounts and attaching
hardware for 3 Sector Frames
• Fits round or polygon poles from 12'' to 45'' diameter
• Fits up to 60'' with the addition of the RM-ADK
Large Pole Adapter Kit
• When ordering V-Frames to use with this kit,
add (-NLB) to part number, to get frame without
leg bracket hardware
| Photo | Part# | Description | Pole Diameter | Weight | Pricing | Cart |
|---|---|---|---|---|---|---|
 |
MDFCC |
Monopole Direct Frame Connection Kit | 12'' - 45'' | 634 lb | $1,885.00 | |
 |
RM-ADK |
Large Pole Adapter Kit (2 required) |
45'' - 60'' | 101 lb | $295.00 |
Hardware Kit for Monopole Direct Frame Connection
Monopole ComponentsMonopole Direct Frame Connection Kit
Hardware Kit
• Use to attach V-Series Sector Frames to monopoles
• No mounting pipes required
• Kit includes plates and hardware for attaching
one Sector Frame
• Will work with any Ring Mount using 5/8'' bolts
with a 6'' x 6'' hole pattern
• When ordering V-Frames to use with this kit,
add (-NLB) to part number, to get frame without
leg bracket hardware
| Photo | Part# | Description | Weight | Pricing | Cart |
|---|---|---|---|---|---|
 |
MDFC-K |
Single Sector Direct Frame Connection Kit | 34 lb | $68.49 | |
 |
RMBP |
$114.99 |
Monopole Sector Frame Attachment Assemblies
Monopole Sector Frame Attachments
• Allow attachment of sector frames to a monopole using 4-1/2” mounting pipes
• Kits include two Ring Mounts, 4-1/2” OD Mounting Pipes, and hardware
| Photo | Part# | Description | Pole Size | Weight | Pricing | Cart |
|---|---|---|---|---|---|---|
 |
MSFAA |
Sector Frame Attachment Assembly (3 sector) | 12” - 45” | 790 lb | $2,065.00 | |
 |
MSFAA-L |
Sector Frame Attachment Assembly Large (3 sector) | 45” - 60” | 995 lb | $2,360.00 | |
 |
MSFAA-Q |
Sector Frame Attachment Assembly (4 sector) | 12” – 60” | 1,110 lb | $2,565.00 |
Cellular Pipe Frames
Monopole Components
Cellular Pipe Frames
• 3-1/2'' Pipe
• 12'-6'' or 14'-6'' Length
• With mounting plate and U-bolts
• For mounting to a 4-1/2'' pipe
Cellular Pipe Frames
• 3-1/2'' Pipe
• 12'-6'' or 14'-6'' Length
• With mounting plate and U-bolts
• For mounting to a 4-1/2'' pipe
| Photo | Part# | Length | Pricing | Cart |
|---|---|---|---|---|
 |
SP216-12-NS |
12' - 6'' | $234.00 | |
 |
SP216-14-NS |
14' - 6'' | $249.00 |
Pipe Mount Kits
Monopole Components
Pipe Mount Kits
• Mounts to 3-1/2'' pipes (i.e. pipe frames and platforms)
• Kits include:
U-Bolts
Saddle bracket
Antenna mounting pipes when indicated
• Photo on left shows four kits
Pipe Mount Kits
• Mounts to 3-1/2'' pipes (i.e. pipe frames and platforms)
• Kits include:
U-Bolts
Saddle bracket
Antenna mounting pipes when indicated
• Photo on left shows four kits
| Photo | Part# | Mounting Pipe | U of M | Pricing | Cart |
|---|---|---|---|---|---|
 |
SP219 |
None Included | Each | $51.99 | |
 |
SP219-72 |
(1) 2-3/8'' x 72'' | Each | $84.49 | |
 |
SP219-84 |
(1) 2-3/8'' x 84'' | Each | $86.99 | |
 |
SP219-96 |
(1) 2-3/8'' x 96'' | Each | $88.99 | |
 |
SP219-126 |
(1) 2-3/8'' x 126'' | Each | $94.49 | |
 |
SP219-96H |
(1) 2-7/8'' x 96'' | Each | $112.49 | |
 |
SP219-120H |
(1) 2-7/8'' x 120'' | Each | $129.99 |
Work Support Platforms
Monopole Components
Platforms - Work Support
• Work Support Platforms provide 12” wide grating sections for workers to stand on
• For proper safety workers must be tied off to the monopole
• WP197 includes mounting hardware for square tube arms 3” to 4”
• WP197-10 includes hardware kit for attachment to horizontal face pipes 1-1/2” to 3-1/2” diameter
Platforms - Work Support
• Work Support Platforms provide 12” wide grating sections for workers to stand on
• For proper safety workers must be tied off to the monopole
• WP197 includes mounting hardware for square tube arms 3” to 4”
• WP197-10 includes hardware kit for attachment to horizontal face pipes 1-1/2” to 3-1/2” diameter
| Photo | Part# | Length | Pricing | Cart |
|---|---|---|---|---|
 |
WP197 |
3' | $241.00 | |
 |
WP197-10 |
10' | $389.00 |
Hand Hole Rims for Polygon Poles
Monopole Components
Hand Hole Rim for Polygon Pole
• Can be welded to existing polygon poles
• Providing access for internal routing of transmission lines
• Material meets ASTM A572 GR-65 specification
• Provides structural support for holes
• Rims for use near the antennas include J-Hooks for
supporting the transmission lines with hoisting grips
• Black or galvanized
• Welding instructions included
Hand Hole Rim for Polygon Pole
• Can be welded to existing polygon poles
• Providing access for internal routing of transmission lines
• Material meets ASTM A572 GR-65 specification
• Provides structural support for holes
• Rims for use near the antennas include J-Hooks for
supporting the transmission lines with hoisting grips
• Black or galvanized
• Welding instructions included
| Photo | Part# | Dimensions | J-Hooks | Finish | Pricing | Cart |
|---|---|---|---|---|---|---|
 |
HHR69 |
6'' x 9'' OD, 1/2'' THICK, 3.5'' DEEP |
Yes | Black | $63.49 | |
 |
HHR69-G |
6'' x 9'' OD, 1/2'' THICK, 3.5'' DEEP |
Yes | Gal. | $77.49 | |
 |
HHR612 |
6'' x 12'' OD, 1/2'' THICK, 2.5'' DEEP |
Yes | Black | $70.49 | |
 |
HHR612-G |
6'' x 12'' OD, 1/2'' THICK, 2.5'' DEEP |
Yes | Gal. | $86.49 | |
 |
HHR618 |
6'' x 18'' OD, 1/2'' THICK, 2.5'' DEEP |
Yes | Black | $79.49 | |
 |
HHR618-G |
6'' x 18'' OD, 1/2'' THICK, 2.5'' DEEP |
Yes | Gal. | $97.49 | |
 |
HHR1025 |
10.5'' x 25.5'' OD, 3/4'' THICK, 3.5'' DEEP |
No | Black | $198.49 | |
 |
HHR1025-G |
10.5'' x 25.5'' OD, 3/4'' THICK, 3.5'' DEEP |
No | Gal. | $226.00 |
Quick Navigation
Need Assistance?
Our support team is availablefrom 8:30 AM - 8:00 PM ET
to assist you.