Universal Tubular Arm Pipe Mounts (Face Mount) Back to Tower Mounts

Universal Tubular-Arm Pipe Mounts (Full Kit with Pipe)

• TAP-472 • Face Mounting Universal Tubular Arm Mount.
• Universal Tubular-Arm Pipe Mounts (Face Mounts).
• Complete Kit with 4-1/2'' x 72'' pipe.
• 4-1/2'' x 72'' pipe included in TAP-472.
• Stands off from tower face, allowing coax lines
  to run between tower & mounting arms.
• For use on non-tapered tower sections.
• Cross-arms are 2-1/2'' x 2-1/2'' x 80'', 3/16'' (wall) sq structural tubing.
• No-pipe version accepts mountings pipes 2-3/8'' - 4-1/2''
• Hot-dip galvanized after fabrication.
• Universal, fits 7/8'' to 5'' legs.


Download Specs/Instructions

Universal Tubular-Arm Pipe Mounts (Full Kit No Pipe)

• TAP-NP • Face Mounting Universal Tubular Arm Mount.
• Universal Tubular-Arm Pipe Mounts (Face Mounts).
• Complete Kit with No pipe.
• 4-1/2'' x 72'' pipe included in TAP-472.
• Stands off from tower face, allowing coax lines
  to run between tower & mounting arms.
• For use on non-tapered tower sections.
• Cross-arms are 2-1/2'' x 2-1/2'' x 80'', 3/16'' (wall) sq structural tubing.
• No-pipe version accepts mountings pipes 2-3/8'' - 4-1/2''
• Hot-dip galvanized after fabrication.
• Universal, fits 7/8'' to 5'' legs.


Download Specs/Instructions

Universal Tubular-Arm Pipe Mounts (Pipe Hardware Kit Only)

• TAP-PM • Face Mounting Universal Tubular Arm Mount.
• Universal Tubular-Arm Pipe Mounts (Face Mounts).
• Pipe Mount Hardware Kit Only.
• 4-1/2'' x 72'' pipe included in TAP-472.
• Stands off from tower face, allowing coax lines
  to run between tower & mounting arms.
• For use on non-tapered tower sections.
• Cross-arms are 2-1/2'' x 2-1/2'' x 80'', 3/16'' (wall) sq structural tubing.
• No-pipe version accepts mountings pipes 2-3/8'' - 4-1/2''
• Hot-dip galvanized after fabrication.
• Universal, fits 7/8'' to 5'' legs.


Download Specs/Instructions

Universal Tubular-Arm Pipe Mounts (4 Leg Hardware/Plates Only)

• TAP-LM • Face Mounting Universal Tubular Arm Mount.
• Universal Tubular-Arm Pipe Mounts (Face Mounts).
• (4) Leg Mount Hardware & Plates Only.
• 4-1/2'' x 72'' pipe included in TAP-472.
• Stands off from tower face, allowing coax lines
  to run between tower & mounting arms.
• For use on non-tapered tower sections.
• Cross-arms are 2-1/2'' x 2-1/2'' x 80'', 3/16'' (wall) sq structural tubing.
• No-pipe version accepts mountings pipes 2-3/8'' - 4-1/2''
• Hot-dip galvanized after fabrication.
• Universal, fits 7/8'' to 5'' legs.


Download Specs/Instructions