Non-Penetrating Rooftop Frames with RRU Mounts

Non-Penetrating Rooftop Frames with RRU Mounts

These rooftop pipe frames are non-penetrating, easy to assemble and include integral RRU mounts.

  • Similar to our standard non-penetrating rooftop pipe frames, but include a rear RRU mounting frame
  • Standard kits include four 2-3/8" x 174" antenna mounting pipes
  • NP kits include hardware for 2-3/8" antenna mounting pipes; purchase antenna mounting pipes separately
  • If using other size antenna mounting pipes purchase SCX7-U universal crossover plate kits
  • Welded trays for easy assembly
  • If additional ballast capacity is required use ballast tray add-on kits
  • Purchase rubber mats separately
  • See our online assembly drawings for ballast equations at SitePro1.com
Non-Penetrating Rooftop Frames with RRU Mounts
SKUFace WidthMounting PipesFootprintMats RequiredWeightPrice
10’-6”(4) 2-3/8” x 174”92” x 126”61049.00 $4,290.00
12’-6”(4) 2-3/8” x 174”92” x 150”81108.00 $4,355.00
14’-6”(4) 2-3/8” x 174”92” x 174”121375.00 $5,205.00
10'-6''No Pipes92'' x 126''6830.00 $3,300.00
12'-6''No Pipes92'' x 150''8930.00 $3,590.00
14'-6''No Pipes92'' x 174''121155.00 $4,220.00
Works With
SKUDescriptionWeightPrice
Rubber Mat 18” x 48”15.50 $39.15
Universal Crossover Plate Kits15.74 $97.00
Chain-Type Ballast Tie-Down Kit for Single Ballast Tray12.00 $196.00