Sector Frames

XLD V-Frames with Integral RRU Mounting Pipes
    Sector Frames - XLD V-Frame RRU Mounting Pipes
    • Features our New BCAM™ Taper Adjustment System
      Easily adjust taper of a fully loaded frame while mounted to tower
      with battery operated impact gun, by tightening or loosening
      one nut (Infinitely adjustable from –2.5 to 6 degrees)
    • Xtreme Load Design safely supports up to 12 RRU’s plus 4
      antennas
    • Two 3-1/2'' vertical Pipes hold additional RRUs
    • Includes Stiff Arm and hardware to mount 2-3/8'' Antenna
      Mounting Pipes (ordered separately this page or in hardware
      section)
    • Call for 2-7/8'' Antenna Mounting Pipe versions
    • Frames rotate for easy azimuth adjustment
    • Contact us for load and engineering data
    • Typical Loading info for VFA10-RRU (per antenna pipe)
    • 400' Mount Height / Structure Class I or II / Exposure Category
      B or C
    • 180 mph Ultimate Wind Speed / 2.75'' Ice Thickness
    • Equip Wind Load: 550 lb • Equip Dead Load: 275 lb
    • Equip Wind Load with Ice: 250 lb
    • Equip Dead Load with Ice: 1,000lb
    • LEG SIZES 1-1/2'' to 9-1/2'' Round Legs and 3'' to 6'' Angles
Photo Part#Face WidthHardware
to mount
# antennas
WeightPricing
Cart
VFA6-RRU
 7' 2 348 lb$882.99
Qty:
 
VFA8-RRU
 9' 3 370 lb$908.99
Qty:
 
VFA10-RRU
 10' - 6'' 4 412 lb$934.99
Qty:
 
VFA12-RRU
 12' - 6'' 4 420 lb$987.99
Qty:
 
VFA14-RRU
 14' - 6'' 4 442 lb$1,003.99
Qty:
 
BCAM-SDLL
 --- Large-Leg Adapter to 16'' Round Legs, #12 Breakdown Legs, 11'' Angles 114 lb$235.00
Qty:
 

XLD SD V-Frames
    Sector Frames - XLD SD V-Frames
    • Features our New BCAM™ Taper Adjustment System
      Easily adjust taper of fully loaded frame while mounted to tower
      with a battery operated impact gun by tightening or loosening
      one nut (Infinitely adjustable from –2.5 to 6 degrees)
    • Features our New Quick-Plate™ for easy grounding and
      addition of RRU Mounting pipes or Unistrut
      Integrated plates accommodate up to eight lugs per plate for
      grounding (there are four plates per V-Frame)
      Slotted holes allow attachment of 2-3/8'' - 4-1/2'' OD pipes to
      support RRU’s (Pipe and U-Bolts purchased separately in
      hardware section)
      The 3/8'' holes can also be used to attach Unistrut to the frame
    • Round-member face offers lower wind resistance
    • Frames rotate for easy azimuth adjustment
    • Includes Stiff Arm and hardware to mount 2-3/8'' Antenna
      Mounting Pipes (ordered separately this page or in hardware
      section)
    • Typical Loading info for VFA10-SD (per antenna pipe)
    • 400' Mount Height / Structure Class I or II / Exposure Category
      B or C
    • 180 mph Ultimate Wind Speed / 2.75” Ice Thickness
    • Equipment Wind Load: 1,000 lb (per antenna pipe)
    • Equipment Dead Load: 500 lb (per antenna pipe)
    • Equipment Wind Load with Ice: 450 lb (per antenna pipe)
    • Equipment Dead Load with Ice: 1,800 lb (per antenna pipe)
    LEG SIZES 1-1/2'' to 9-1/2'' Round Legs and 3'' to 6'' Angles
Photo Part#Face WidthHardware to mount (x) antennasStiff armsWeightPricing
Cart
VFA6-SD-S
 7'-0'' 2 1 288 lb$659.00
Qty:
 
VFA6-SD
 7'-0'' 2 2 348 lb$789.00
Qty:
 
VFA8-SD-S
 9'-0'' 3 1 310 lb$709.00
Qty:
 
VFA8-SD
 9'-0'' 3 2 370 lb$819.00
Qty:
 
VFA10-SD-S
 10'-6'' 4 1 352 lb$749.00
Qty:
 
VFA10-SD
 10'-6'' 4 2 412 lb$859.00
Qty:
 
VFA12-SD-S
 12'-6'' 4 1 360 lb$779.00
Qty:
 
VFA12-SD
 12'-6'' 4 2 420 lb$889.00
Qty:
 
VFA14-SD-S
 14'-6'' 4 1 382 lb$809.00
Qty:
 
VFA14-SD
 14'-6'' 4 2 442 lb$919.00
Qty:
 
BCAM-SDLL
 --- Large-Leg Adapter to 16'' Round Legs, #12 Breakdown Legs, 11'' Angles --- 114 lb$235.00
Qty:
 

SUPER XLD Heavy-Duty V-Frames
    Sector Frames - Super XLD HD V-Frame
    • SUPER XLD - Our most robust Sector Frame designed for the
      most extreme loading conditions
    • Features our New BCAM™ Taper Adjustment System
      Easily adjust taper of fully loaded frame while mounted to tower
      with a battery operated impact gun by tightening or loosening
      one nut (Infinitely adjustable from –2.5 to 6 degrees)
    • Features our New Quick-Plate™ for easy grounding and
      addition of RRU Mounting pipes or Unistrut
      Integrated plates accommodate up to eight lugs per plate for
      grounding (there are four plates per V-Frame)
      Slotted holes allow attachment of 2-3/8'' - 4-1/2'' OD pipes to
      support RRU’s (Pipe and U-Bolts purchased separately in
      hardware section)
      The 3/8'' holes can also be used to attach Unistrut to the frame
    • Includes Two Stiff Arms and hardware to mount 2-3/8'' and 2-7/8''
      Antenna Mounting Pipes (ordered separately this page or in
      hardware section)
    • Frames rotate for easy azimuth adjustment
    • Typical Loading info for VFA10-HD (per antenna pipe)
    • 400’ Mount Height / Structure Class I or II / Exposure Category B
      or C
    • 180 mph Ultimate Wind Speed / 2.75” Ice Thickness
    • Equip Wind Load: 2,400 lb • Equip Dead Load: 1,200 lb
    • Equip Wind Load with Ice: 700 lb
    • Equip Dead Load with Ice: 2,800lb
    • LEG SIZES 1-1/2'' to 9-1/2'' Round Legs and 3'' to 6'' Angles
Photo Part#Face WidthHardware
to mount
# antennas
Stiff armsWeightPricing
Cart
VFA6-HD-S
 7'-0'' 2 1 372 lb$985.00
Qty:
 
VFA6-HD
 7'-0'' 2 2 442 lb$1,105.00
Qty:
 
VFA8-HD-S
 9'-0'' 3 1 382 lb$1,015.00
Qty:
 
VFA8-HD
 9'-0'' 3 2 472 lb$1,135.00
Qty:
 
VFA10-HD-S
 10' - 6'' 4 1 429 lb$1,066.00
Qty:
 
VFA10-HD
 10' - 6'' 4 2 499 lb$1,186.00
Qty:
 
VFA12-HD-S
 12' - 6'' 4 1 439 lb$1,090.00
Qty:
 
VFA12-HD
 12' - 6'' 4 2 509 lb$1,210.00
Qty:
 
VFA14-HD-S
 14' - 6'' 4 1 459 lb$1,114.00
Qty:
 
VFA14-HD
 14' - 6'' 4 2 529 lb$1,234.00
Qty:
 
BCAM-HDLL
 --- Large-Leg Adapter to 16'' Round Legs, #12 Breakdown Legs, 11'' Angles --- 130 lb$265.00
Qty:
 

Ultimate Sector Frames
    Sector Frames - Ultimate Sector Frames

    • COMPLETE KITS include:
      Attachment hardware
      Two stiff arms
      Antenna mounting pipes
    • 2' gate is easily adjusted for taper up to 6 degrees in
      3/4 degree increments
    • Frames are manufactured from 2-3/8'' pipe and rotate for
      easy azimuth adjustment
    • Universal mounting, round legs from 1'' to 8'' and 60° angle
      legs from 1-1/2'' to 8'', 90° angles 1-1/2'' to 6''
    • Large-Leg Adapter Kit available for round legs up to 12-3/4'',
      60° angle legs up to 12'', and 90° angles up to 8-1/2''
Photo Part#Face WidthFramesMounting pipesPricing
Cart
USF10-296-U
 10' - 6'' 2-3/8'' O.D. Face Pipes (2) 2-3/8'' x 96''$842.49
Qty:
 
USF10-372-U
 10' - 6'' 2-3/8'' O.D. Face Pipes (3) 2-3/8'' x 72''$899.99
Qty:
 
USF10-384-U
 10' - 6'' 2-3/8'' O.D. Face Pipes (3) 2-3/8'' x 84''$909.99
Qty:
 
USF10-396-U
 10' - 6'' 2-3/8'' O.D. Face Pipes (3) 2-3/8'' x 96''$920.49
Qty:
 
USF10-3126-U
 10' - 6'' 2-3/8'' O.D. Face Pipes (3) 2-3/8'' x 126''$951.99
Qty:
 
USF10-3096-U
 10' - 6'' 2-3/8'' O.D. Face Pipes (3) 2-7/8'' x 96''$1,038.99
Qty:
 
USF12-372-U
 12' - 6'' 2-3/8'' O.D. Face Pipes (3) 2-3/8'' x 72''$930.99
Qty:
 
USF12-384-U
 12' - 6'' 2-3/8'' O.D. Face Pipes (3) 2-3/8'' x 84''$941.49
Qty:
 
USF12-396-U
 12' - 6'' 2-3/8'' O.D. Face Pipes (3) 2-3/8'' x 96''$951.99
Qty:
 
USF12-472-U
 12' - 6'' 2-3/8'' O.D. Face Pipes (4) 2-3/8'' x 72''$1,013.99
Qty:
 
USF12-484-U
 12' - 6'' 2-3/8'' O.D. Face Pipes (4) 2-3/8'' x 84''$1,028.99
Qty:
 
USF12-496-U
 12' - 6'' 2-3/8'' O.D. Face Pipes (4) 2-3/8'' x 96''$1,038.99
Qty:
 
USF12-4126-U
 12' - 6'' 2-3/8'' O.D. Face Pipes (4) 2-3/8'' x 126''$1,071.49
Qty:
 
USF12-4096-U
 12' - 6'' 2-3/8'' O.D. Face Pipes (4) 2-7/8'' x 96''$1,201.49
Qty:
 
USF14-472-U
 14' - 6'' 2-7/8'' O.D. Face Pipes (4) 2-3/8'' x 72''$1,049.49
Qty:
 
USF14-484-U
 14' - 6'' 2-7/8'' O.D. Face Pipes (4) 2-3/8'' x 84''$1,060.99
Qty:
 
USF14-496-U
 14' - 6'' 2-7/8'' O.D. Face Pipes (4) 2-3/8'' x 96''$1,076.49
Qty:
 
USF14-4126-U
 14' - 6'' 2-7/8'' O.D. Face Pipes (4) 2-3/8'' x 126''$1,119.49
Qty:
 
USF14-4096-U
 14' - 6'' 2-7/8'' O.D. Face Pipes (4) 2-7/8'' x 96''$1,246.99
Qty:
 
TAM-LL
 -- Lge Leg Adapter Kit Description at Top of List ---$121.99
Qty:
 

Fold-A-Frame Sector Frames
    Sector Frames - Fold-A-Frame
    • Assembles in minutes
    • 3' Gate is easily adjusted for taper up to 6 degrees in 3/4°
      increments
    • Frames rotate for easy azimuth adjustment
    • Universal mounting, round legs from 1'' to 8'' and 60° angle legs
      from 1-1/2'' to 8'', 90° angles 1-1/2'' to 6''
    • Large-Leg Adapter Kit (TAM-LL) available below for round legs
      up to 12-3/4'', 60° angle legs up to 12'' & 90° angles to 8-1/2''
    • Includes hardware for up to four 2-3/8'' OD Antenna Mounting
      Pipes (ordered separately this page or in Hardware section)
    • If using 2-7/8'' OD Antenna Mounting Pipes order UB1300
      U-Bolts in Hardware section (2 required per Antenna Mounting
      Pipe)
    • Configured to accept 2, 3 or 4 antennas
Photo Part#Face Width# of stiff armsWeightPricing
Cart
FF12-U
 12' - 6'' One 350 lb$789.49
Qty:
 
FFD12-U
 12' - 6'' Two 410 lb$909.99
Qty:
 
TAM-LL
 -- -- See Description above$121.99
Qty:
 

Swift-Deploy BC Frame
    Sector Frames - Swift Deploy BC Frame

    • Pre-assembly in factory
    • Ensures swift deployment and quick installation
    • Round-member face offers lower wind resistance than
      angle frames
    • Frames are manufactured from 2-3/8'' Pipe
    • Frames rotate for easy azimuth adjustment
    • Fits both straight and tapered tower sections, 6'' or 24''
      taper over 20' vertical section
    • Includes hardware to mount up to four 2-3/8'' OD Antenna
      Mounting Pipes (ordered separately in Hardware section)
    • Stiff Arm included
    • Heavy-duty Frame
Photo Part#Face WidthApplicationPricing
Cart
SDF12-U
 12' - 6'' 1-1/2'' to 10-3/4'' Round Legs and 3'' to 8'' Angles$1,013.99
Qty:
 

Lightweight T-Frames
    Sector Frames - Lightweight T-Frames
    • COMPLETE KITS include: R5 Universal Pipe Mount, attachment
      hardware, two stiff arms and antenna mounting pipes
    • Attaches to round legs 1-1/2'' to 4-1/2''
    • Optional Large Leg Adapter Kit allows attachment to 1-1/2''
      to 10-3/4'' round legs and 3'' to 8'' angle legs
    • 2.5' standoff
    • Frames rotate for easy azimuth adjustment and R5 Universal
      Pipe Mount provides taper adjustment up to 5.7°
    • 30'' vertical separation between two pipe levels, easy
      and safe to work on
    • Most common antenna pipe combinations shown
    • Others available, please call
    • Order LTFXX-NP for frames without antenna mounting pipes
Photo Part#Face WidthMounting pipesPricing
Cart
LTF10-272
 10' (2) 2-3/8'' x 72''$1,325.99
Qty:
 
LTF10-284
 10' (2) 2-3/8'' x 84''$1,333.49
Qty:
 
LTF10-296
 10' (2) 2-3/8'' x 96''$1,340.99
Qty:
 
LTF10-372
 10' (3) 2-3/8'' x 72''$1,367.99
Qty:
 
LTF10-384
 10' (3) 2-3/8'' x 84''$1,377.99
Qty:
 
LTF10-396
 10' (3) 2-3/8'' x 96''$1,388.49
Qty:
 
LTF10-3126
 10' (3) 2-3/8'' x 126''$1,420.99
Qty:
 
LTF12-372
 12' (3) 2-3/8'' x 72''$1,419.99
Qty:
 
LTF12-384
 12' (3) 2-3/8'' x 84''$1,429.99
Qty:
 
LTF12-396
 12' (3) 2-3/8'' x 96''$1,440.49
Qty:
 
LTF12-472
 12' (4) 2-3/8'' x 72''$1,461.49
Qty:
 
LTF12-484
 12' (4) 2-3/8'' x 84''$1,475.99
Qty:
 
LTF12-496
 12' (4) 2-3/8'' x 96''$1,490.49
Qty:
 
LTF12-4126
 12' (4) 2-3/8'' x 126''$1,532.99
Qty:
 
LTF15-372
 15' (3) 2-3/8'' x 72''$1,523.99
Qty:
 
LTF15-384
 15' (3) 2-3/8'' x 84''$1,533.99
Qty:
 
LTF15-396
 15' (3) 2-3/8'' x 96''$1,544.49
Qty:
 
LTF15-472
 15' (4) 2-3/8'' x 72''$1,565.49
Qty:
 
LTF15-484
 15' (4) 2-3/8'' x 84''$1,579.99
Qty:
 
LTF15-496
 15' (4) 2-3/8'' x 96''$1,594.49
Qty:
 
LTF15-4126
 15' (4) 2-3/8'' x 126''$1,636.99
Qty:
 
LLEG-K
 Opt Large Leg Adapter Kit 4-3/4'' to 10-3/4'' Dia. & 3'' to 8'' Angles$170.99
Qty:
 

XLD Sector Frame Reinforcement Kit
    Sector Frames - XLD Reinforcement Kit
    • Universal design
    • Provides extra capacity to existing Sector Frames for
      mounting RRU’s
    • Provides both vertical and horizontal reinforcement
    • Load Capacity
      Max additional normal load capacity gained is 1,200 lb
      Max additional tangential load capacity gained is 400 lb
      Max additional dead load capacity gained is 1,500 lb
    • Universal mounting; round legs from 1'' to 8'', 60° angle legs
      from 1-1/2'' to 8'', and 90° angle legs from 1-1/2'' to 6''
    • Large-Leg Adapter Kit available for round legs up to 12-3/4'',
      60° angle legs up to 12'', and 90° angles up to 8-1/2''
    • Contact us for detailed load and engineering data
Photo Part#Face WidthApplicationWeightPricing
Cart
SFR-K
 12' - 6'' 24'' to 36'' Standoff 132 lb$310.99
Qty:
 
SFR-K-L
 12' - 6'' 36'' to 48'' Standoff 153 lb$362.99
Qty:
 
TAM-LL
 --- Large Leg Adapter Kit 39 lb$121.99
Qty:
 

XLD Sector Frame Stabilizer Kits
    Sector Frames - XLD Frame Stabilizers
    • Adds additional support to existing sector frames
    • Based on design criteria noted in capacity letter
      SFS-H and SFS-H-L
      Max additional normal load capacity gained 1,050 lbs
      Max additional tangential load capacity gained 300 lbs
      Max additional dead load capacity 0 lbs
    • Based on design criteria noted in capacity letter
      SFS-V and SFS-V-L
      Max additional normal load capacity gained 0 lbs
      Max additional tangential load capacity gained 300 lbs
      Max additional dead load capacity 1,500 lbs
    • Universal mounting, round legs from 1'' to 8'' and 60° angle
      legs from 1-1/2'' to 8'', 90° angles 1-1/2'' to 6''
    • Contact us for load and engineering data.
Photo Part#StabilizerApplicationWeightPricing
Cart
SFS-H
 Horizontal 24'' to 36'' Standoff 67 lb$165.49
Qty:
 
SFS-H-L
 Horizontal 36'' to 48'' Standoff 77 lb$186.30
Qty:
 
SFS-V
 Vertical 24'' to 36'' Standoff 66 lb$165.49
Qty:
 
SFS-V-L
 Vertical 36'' to 48'' Standoff 77 lb$186.30
Qty:
 
TAM-LL
 --- Large Leg Adapter Kit 39 lb$121.99
Qty:
 

Standoff Arm Reinforcement Kits
    Sector Frames
    Standoff Arm Reinforcement Kits


    • Universal design
    • Provides extra capacity to tower platforms or standoff arms
    • Provides vertical reinforcement only
    • Fits round legs 1-1/2'' to 4-1/2'' OD, 60° angle legs from 1-1/2''
      to 4-1/2'', and 90° angle legs from 1-1/2'' to 3''
    • Fits round or square tube standoff arms 1-1/2'' to 5''
    • Use PRK-FMA for tower platform reinforcement
    • Use PRK-FMA1 for standoff arm reinforcement
Photo Part#DescriptionU of mPricing
Cart
PRK-FMA
 Tower Platform Reinforcement Kit 3 Arms$915.00
Qty:
 
PRK-FMA1
 Single-Arm Standoff Reinforcement Kit 1 Arm$305.00
Qty:
 

Antenna Mounting Pipes
    Sector Frames
    Antenna Mounting Pipes


    • Pipe only
    • No kits
    • Be sure to order the proper diameter pipe
      for the above sector frames
    • Other sizes in Hardware section
Photo Part#Pipe SizePricing
Cart
P272
 2-3/8'' x 72''$32.99
Qty:
 
P284
 2-3/8'' x 84''$37.49
Qty:
 
P296
 2-3/8'' x 96''$41.99
Qty:
 
P2126
 2-3/8'' x 126''$54.99
Qty:
 
P3096
 2-7/8'' x 96''$82.99
Qty:
 
P30120
 2-7/8'' x 120''$103.99
Qty:
 
UB1300
 U-Bolts for 2-7/8'' pipe / 2 required per pipe$3.21
Qty:
 

My Cart

Checkout
Total:
$0.00

No items in your cart

Your cart is currently empty. As you add items, they will appear in your cart.

Quick Navigation
Copyright © 2018 Valmont Site Pro 1, All Rights Reserved. | Catalog Index | Privacy Policy | Terms of Use | Site Credits