Winter Clearance Sale
Winter Clearance SaleNylon Cable Ties - Dec 2015
UV resistant natural cable ties.
TS = Tensile Strength
MBD = Max Bundle Diameter
LGTH = Length
|Photo||Part#||Lgth||Width||Ts||Mbd||Qty / color||Pricing||
|11''||0.18''||50 lb||3''||100 Clear||Was: |
|14.5''||0.18''||50 lb||4''||100 Clear||Was: |
Winter Clearance SalePMI Large Steel Figure 8 - Dec 2015
PMI Large Steel Figure 8
• The classic descender for ropework
• This XL version is designed for maximum wear and versatility
• Accepts single or double wrap braking
• Ropes up to 5/8''
• Bottom hole can be used as sticht plate
|Large Steel Figure 8||Was: |
Winter Clearance SaleDual Cable Snap-Ins - Dec 2015
One-piece Dual Cable Snap-In allows two cables to be attached to one 3/4” hole.
On 1-5/8” models the hanger clip swings up and out of the way to allow easy insertion of the Snap-In.
Then simply swing it down and it locks in place.
Easier & faster to use than stackable Snap-Ins.
Lowest Cost - Each Dual Cable Snap-In holds two cables.
|Photo||Part#||Cable Size||U of m||Pricing||
|1-5/8”||10 pack||Was: |
Winter Clearance SaleTamper Resistant Ground Bar Hardware - Dec 2015
Tamper Resistant Ground Bar Hardware
TRHK is a kit of 4 tamper-resistant bolts for the ground bar-to-insulator and mounting bracket-to-insulator connections.
TRLS38 is a kit of 4 Stainless tamper-resistant bolts for wall mounting.
T45KEY is a key for tamper resistant hardware.
|Photo||Part#||Description||U of m||Pricing||
|Tamper resistant SS 3/8'' x 1-3/4'' bolts||Kit of 4||Was: |
Winter Clearance SaleMaster Lock Padlock - Dec 2015
Master Lock Padlock
Laminated steel body with hardened 8/32'' shackle.
3/4'' deep, 5/8'' opening.
4-pin cylinder and dual locking levers.
|Master Lock Padlock||Was: |