Rigging - Pulleys & Swivels

Single Sheave Pulleys

• Versatile ultra-compact pulley
• Designed for hauling systems and deviations
• Sheave mounted on self-lubricating bushings for efficiency
• Maximum working load 1,124 lb (5 kN)
• Minimum breaking strength 3,372 lb (15 kN)

Single Sheave Pulleys

• Fixed side plates
• Allow quick installation and coupling with a rope clamp
• Designed for hauling systems and deviations
• Sheave mounted on self-lubricating bushings for efficiency
• Maximum working load 1,124 lb (5 kN);
• Minimum breaking strength 5,170 lb (23 kN)

Single Sheave Pulleys

• Strong, reliable, compact, and lightweight pulley
• Great performance for its size
• TR pulley has a true oilite bearing
• 1.2'' Aluminum sheave
• Maximum working load 2,248 lb (10 kN)
• Minimum breaking strength 5,845 lb (26 kN)

Single Sheave Pulleys

• Keylock system prevents accidental snagging of
  carabiner when putting pulley in place
• Gate opening on pulley side facilitates installation of rope
  when pulley is fixed to anchor
• Sheave mounted on sealed ball bearings for excellent efficiency
• TRIACT-LOCK locking system minimizes friction on rope
  while keeping set-ups simple
• Made from durable aluminum
• Maximum working load 899 lb (4 kN)
• Major axis strength 4,496 lb (20 kN)

Single Sheave Pulleys

• Rigging pulley with swivel cheeks
• Stainless steel axle
• Sintered self-lubricating bushings
• Tamper-proof design
• Minimum breaking strength 8,543 lb (38 kN)

Single Sheave Pulleys

• Lightweight high-strength aluminum
• Maintenance-free sealed bearing
• Hard-coat anodized side plates
• Maximum working load 2,500 lb (11 kN)
• Minimum breaking strength 10,000 lb (44 kN)

Single Sheave Pulleys
• Combines a pulley, rigging plate and swivel, all in one
  compact piece of equipment
• Use on the saddle bridge, as a lanyard adjuster or in your
  climbing system
• Eliminates twisting of climbing line when used as a rolling
  attachment point on the saddle bridge
• Rubber grommet-lined attachment points hold carabiners
  snugly to help prevent cross-loading
• Pulley body is machined from solid aluminum to increase
  strength and decrease weight
• Maximum working load 1,124 lb (5 kN)
• Minimum breaking strength 6,295 lb (28 kN)

Single Sheave Pulleys

• Swivel side plate allows quick and easy rope installation
  without removing pulley from connecting device
• Swivel eye keeps line from twisting due to turning loads
• Maximum working load 1,800 lb (8 kN)
• Minimum breaking strength 8,093 lb (36 kN)

Single Sheave Pulleys

• Based on Russ Anderson’s original design
• These pulleys are essential equipment to the serious rigger
• Rotating side plates allow attachment anywhere on rope
• 3'' and 4'' pulleys accept multiple carabiners
• Axle nuts are marked with a blue witness line
• Line indicates if nut has been turned or tampered with
• Stainless steel side plates with aluminum sheaves
• See chart below for Breaking Strength (BS)

Single Sheave Pulleys

• The Omni-Block combines swivel and pulley into one tool
• Eliminates need for the carabiner by reducing
  length and pieces of equipment in rigging system
• Sideplate can be opened without detaching from carabiner,   keeping pulley secured
• The integrated swivel top allows the pulley to orient as
  needed in response to load
• Machined from a solid block of aluminum for strength
  optimization and weight reduction
• WLL = Working Load Limit
• MBS = Min Breaking Strength

Single Sheave Pulleys

• The Omni-Block combines swivel and pulley into one tool
• Eliminates need for the carabiner by reducing
  length and pieces of equipment in rigging system
• Sideplate can be opened without detaching from carabiner,
  keeping pulley secured
• The integrated swivel top allows the pulley to orient as
  needed in response to load
• Machined from a solid block of aluminum for strength
  optimization and weight reduction
• WLL = Working Load Limit
• MBS = Min Breaking Strength

Single Sheave Pulleys

• Features a red sideplate to easily differentiate it from the
  Rock Exotica P55 Omni-Block Pulley
• Integrated swivel allows block to orient while reducing gain
• Rope can be installed and removed with one hand, all while
  remaining connected to the anchor
• Sideplate locks with a two-stage, double-catch safety
  mechanism
• WLL = Working Load Limit
• MBS = Min Breaking Strength

Single Sheave Pulleys

• Rope snatch block with an integrated friction bar
• Use for rescue, raising and lowering, or snubbing loads
• Can be used with pulleys to create mechanical advantage,
  reducing amount of force needed to lift heavy loads
• Swivel eye keeps line from twisting due to turning loads
• Hook-to-eye
  Maximum working load 1,500 lb (6.6 kN)
  Minimum breaking strength 6,000 lb (26.7 kN)
• Sheave-to-eye
  Maximum working load 2,500 lb (11 kN)
  Minimum breaking strength 10,000 lb (44 kN)

Single Sheave Pulleys

• Sideplates milled in strategic areas to reduce
  weight while maintaining strength
• Utilizes 2'' aluminum sheaves with sealed high-
  efficiency bearings to get most out of each pull
• Maximum working load 1,798 lb (8 kN)
• Minimum breaking strength 9,892 lb (44 kN)

Single Sheave Pulleys

• Prusik minding pulley with square side plates
• Swivel cheeks
• Stainless steel axle
• Sintered self-lubricating bushings
• Tamper-proof design
• Minimum breaking strength 8,992 lb (40 kN)

Single Sheave Pulleys

• High-strength, high-efficiency Prusik pulley
• Special side plates designed for use with a Prusik
  friction hitch in progress-capture systems
• Accepts up to three carabiners to facilitate use
• Maximum working load 1,798 lb (8 kN)
• Minimum breaking strength 8,093 lb (36 kN)

Single Sheave Pulleys

• Unique shaped of aluminum side plates
• Plates allow efficient use of Prusik hitches
  as belay or progress-capture devices
• Constructed with 3'' dia sheave on a high-efficiency ball bearing
• Sealed bearings
• Aluminum side plates
• Maximum working load 2,248 lb (10 kN)
• Minimum breaking strength 8,543 lb (38 kN)

Single Sheave Pulleys

• Efficient, lightweight, and strong
• Prusik minding capability for use in a haul system
• Aluminum side plates
• Stainless steel rivet axle
• And nylon sheave
• Minimum breaking strength 4,956 lb (22 kN)

Single Sheave Pulleys

• Swinging side plates
• Designed to maneuver heavy loads or for intensive use
• Large-diameter sheave
• Sheave mounted on sealed ball bearings for excellent efficiency
• Maximum working load 1,798 lb (8 kN)
• Minimum breaking strength 8,093 lb (36 kN)

Double Sheave Pulleys

• Recessed axle screw sits flush to pulley sideplates
• This creates a slim, snag-free profile
• Machined parts create a stronger pulley
• Increasing its strength-to-weight ratio
• Axle is integrated into sideplates, adding additional strength
  and rigidity to the pulley
• Machined sideplates allow for a more compact design while
  maintaining same rope capacity of other pulleys
• Maximum working load 1,798 lb (8 kN)
• Minimum breaking strength 8,093 lb (36 kN)

Double Sheave Pulleys

• Sideplates milled in strategic areas to reduce
  weight while maintaining strength
• Utilizes 2'' aluminum sheaves with sealed high-
  efficiency bearings to get most out of each pull
• Maximum working load 1,798 lb (8 kN)
• Minimum breaking strength 9,892 lb (44 kN)

Double Sheave Pulleys
• The Omni-Block combines swivel and pulley into one tool
• Incorporates a unique sideplate
• Sideplate opens while pulley is still attached to anchor
• Eliminates need for the carabiner by reducing
  length and pieces of equipment in rigging system
• Short length of Omni is critical when used in high-angle,
  confined space or other space-sensitive rigging environments
• Light weight makes hauling gear easier
• Sideplate can be opened without detaching from carabiner,
  keeping pulley secured
• The integrated swivel top allows the pulley to orient as
  needed in response to load
• Machined from a solid block of aluminum for strength
  optimization and weight reduction
• WLL = Working Load Limit • MBS = Min Breaking Strength

Double Sheave Pulleys

• Double pulley for Tyrolean traverses on cable or rope
• Stainless steel sheaves for excellent durability
• Sheave mounted on sealed ball bearings for excellent efficiency
• Accepts up to three carabiners to facilitate use
• Maximum working load 2,248 lb (10 kN)
• Minimum breaking strength 5,395 lb (24 kN)

Double Sheave Pulleys

• Based on Russ Anderson’s original design
• These pulleys are essential equipment to the serious rigger
• Rotating side plates allow attachment anywhere on rope
• 3'' and 4'' pulleys accept multiple carabiners
• Axle nuts are marked with a blue witness line
• Line indicates if nut has been turned or tampered with
• Stainless steel side plates with aluminum sheaves
• See chart below for Breaking Strength (BS)

Double Sheave Pulleys

• Double rigging pulley with swivel cheeks
• Stainless steel axle
• Sintered self-lubricating bushings
• Tamper-proof design
• Minimum breaking strength 8,992 lb (40 kN)

Double Sheave Pulleys

• High-strength, high-efficiency double Prusik pulley
• Special side plates designed for use with a Prusik friction
  hitch in progress-capture systems
• Parallel-mounted sheaves and auxiliary attachment point
  for creating the most complex hauling systems
• Large-diameter sheaves mounted on sealed ball
  bearings for excellent efficiency
• Accepts up to three carabiners to facilitate use
• Maximum working load 2,700 lb (12 kN)
• Minimum breaking strength 8,093 lb (36 kN)

Double Sheave Pulleys

• Swivel side plate allows quick and easy rope installation
  without removing pulley from connecting device
• Swivel eye keeps line from twisting due to turning loads
• Maximum working load 1,800 lb (8 kN)
• Minimum breaking strength 8,093 lb (36 kN)

Progress Capture Pulleys

• High-efficiency loss-resistant progress capture pulley
• Well suited for hauling heavy loads
• Allows a rope to be installed while connected to an anchor
• Large-diameter aluminum sheaves on sealed ball bearings
• Side plate locks when loaded & prevents opening during use
• Can use as a simple pulley by locking cam in raised position
• Max working load as simple pulley 1,124 lb (5 kN)
• Max working load as progress capture pulley 562 lb (2.5 kN)
• Minimum breaking strength 4,946 lb (22 kN)

Progress Capture Pulleys

• Designed for use with the JAG double pulley to make
  a 4:1 haul system
• Toothed cam with self-cleaning slot
• Optimizes performance under any conditions
• Sheave mounted on sealed ball bearings for excellent efficiency
• Maximum working load 1,349 lb (6 kN)
• Minimum breaking strength 3,597 lb (16 kN)

Progress Capture Pulleys

• Designed for use with the JAG TRAXION double
  progress capture pulley to make a 4:1 haul system
• Sheave mounted on sealed ball bearings for excellent efficiency
• Maximum working load 1,349 lb (6 kN)
• Minimum breaking strength 3,597 lb (16 kN)
• Certification CE EN 12278, NFPA 1983 Technical Use

Knot Passing Pulleys

• Wide knot-passing pulley
• Integral tie-off/anchor locking pin
• Swivel cheeks
• Stainless steel axle
• Tamper-proof design
• Minimum breaking strength 20,233 lb (90 kN)

Knot Passing Pulleys

• Knot-passing pulley
• High-clearance rope channel allows passage of joining knots
• Large-diameter sheave mounted on sealed ball bearings
  for excellent efficiency
• Locking pins on sheave allow pulley to be used as an anchor
• Maximum working load 2,248 lb (10 kN)
• Minimum breaking strength 8,992 lb (40 kN)

Knot Passing Pulleys

• Most advanced knot-passing pulley on the market
• Sealed ball bearings reduce performance-robbing friction
• Aluminum side plates
• 3-1/2'' high-strength aluminum sheave
• Primary carabiner hole accepts numerous carabiners
• Secondary carabiner holes for use with tag or belay lines
• Two quick-release pins included
• Use for conversion to a high-strength tie-off
• Minimum breaking strength 8,543 lb (38 kN)

Knot Passing Pulleys

• Extremely compact and lightweight, while maintaining
  same capacity of larger Kootenay-style pulleys
• Uses two independent sealed ball bearings for
  increased durability and efficiency
• Maximum working load 1,349 lb (6 kN)
• Minimum breaking strength 8,768 lb (39 kN)

Swivels

• This is the lightest load-rated swivel available
• Features an integrated rubber o-ring
• Holds it snugly in place on most carabiners
• Maximum working load 674 lb (3 kN)
• Minimum breaking strength 5,171 lb (23 kN)

Swivels

• Prevents rope from twisting due to turning load
• Maintenance-free sealed ball bearings
• Aluminum body with steel ball bearings
• P58S
  Maximum working load 1,124 lb (5 kN)
  Minimum breaking strength 5,171 lb (23 kN)
• P58L
  Maximum working load 1,124 lb (5 kN)
  Minimum breaking strength 8,093 lb (36 kN)

Swivels

• Smooth-action swivel with a beautiful feel and finish
• Holes are sized to work with carabiners
• Allows carabiner lock sleeves to rotate through holes
• Heat-treated axle and high-efficiency ball bearing
• Axle and bearings ensure smooth rotation
• Smooth, rounded sides prevent catching on components
• Anodized aluminum
• Minimum breaking strength 9,892 lb (44 kN)

Swivels

• Heavy-duty swivel
• Outlasts aluminum when connected to steel components
• Machined from stainless steel
• Maximum working load 1,124 lb (5 kN)
• Minimum breaking strength 8,093 lb (36 kN)

Swivels

• Save valuable headspace by allowing to connect webbing,
  eyes or thimbles directly to swivel without carabiner
• The 3/8'' steel shackle bolt increases longevity of
  swivel when connected to steel carabiners or cable
• Available in 3/4'' and 1'' shackle widths
• Maximum working load 1,124 lb (5 kN)
• Minimum breaking strength 8,093 lb (36 kN)

Swivels
• Compact alum load cell that measures force up to 20 kN
• Lightweight aluminum construction and portable design
  facilitates in-line use in rigging systems
• Swivel attachment points diminish potentially dangerous
  torsional and off-axis forces
• Features two sampling modes:
  Slow for monitoring
  Fast for dynamic testing
• Monitor forces wirelessly on your iOS device with built-in
  Blue tooth connectivity
• Record and download graphs of events (Enforcer app
  required, sold separately at app store)
• Measures force in kg, lbf, and kN